EasyManuals Logo

Dibo IBH Series User Manual

Dibo IBH Series
Go to English
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
OPERATION EN
DiBO 21
Dosage softener:
If one select the command ‘water softener’ in the menu by pushing on the hot
water button is it possible to adjust the desired dosage. The possible
adjustments are: normal, high, low or no dosage. These can be selected by
pushing via the ‘+’ and ‘-’ buttons till the desired dosage is founded and confirm
than with the warm water button. Push on the reset button to go back. Even
here this remark is valid: the machine will return on the last adjusted value.
Software version:
If you select this path in the menu you can look which software version is
consulted in the cleaner.
2 MAIN SWITCH
The main switch is mounted centrally on the serving panel and has a red colour
with a yellow border. The main switch has two positions:
0: OFF - stop
1: ON- Start (working position)
3 PRESSURE REGULATOR
The pressure regulator is mounted at the right on top of the operating panel.
On the pressure regulator is a turning button, which can adjust the spray
pressure infinitely variable. Turning the button to the right is a higher pressure
(+). Turning the button to left is a lower pressure (-). The pressure can only be
adjusted if the spray gun is served.
REMOTE CONTROL (OPTION)
The remote control is optional on all versions. There are 2 possible versions of
the remote control:
Burner switch (white) & on/o push- button with lamp (remote control 1).
Burner switch (white) & on/o switch (red) with LED (remote control 2).
The burner switch (white) switches on/o the burner on a distance and has to
positions:
Turn to the right (1): burner on.
Turn to the left (0): burner o.
The on/o switch (red) switches on/o the cleaner on a distance and has to
positions:
Turn to the right (1): machine on, LED on.
Turn to the left (0): machine o, LED o.
The on/o push- button (with LED) switches on/o the cleaner at desired
distance. The remote control is not equipped with a cable! The type of cable
has to be the next: 7x0.75 mm or 7x1.5 mm and can be maximum 50 m long.
This to hold down the tension drop over the distance.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dibo IBH Series and is the answer not in the manual?

Dibo IBH Series Specifications

General IconGeneral
BrandDibo
ModelIBH Series
CategoryPressure Washer
LanguageEnglish

Related product manuals