Page | 20
c. User will need to be added to user group:
i. Client View Local Secure: Add to WizardStandAlone user group on local PC
ii. Client View Domain Secure: Add to WizardStandAlone user group on Domain
10) From the top menu click on Tools then Database in the WiZARD2 software.
11) The Database Task window will open with the Connection Mode tab open
12) Check Standalone then click on the Database Connection button
13) Update the following fields:
a. Server Name: This is the name of the Host PC running the WIZARD2 system. You may
need you IT manager to help you identify this device name. NOTE: The server name
should be the name of the host PC followed by \DICKSON
b. Check the box next to User SQL Server Authentication
c. User Name = Dickson
d. Password = Wizard12345
e. Click on ‘Test Connection’.
i. If successful click OK. Close the WIZARD2 application then reopen. You will now
see all WIZARD2 devices on the host PC
ii. If unsuccessful, confirm the server name with your IT manager
14) The application is now connected to the host database
15) The application will automatically refresh the data displayed on the Logger tab every 2 minutes.
To Next Page
Loading...
