Dickson WiZARD2 - F;C Unit of Measure; Viewing Data

Page | 25
4. How to start the broker:
a. If the Red PC icon is present in the lower right corner of the Windows display, double click
on the icon. The Wizard Broker Service Monitor window will open. Click on Start broker.
Minimize the window. The icon is now green.
b. If the icon is not present, go to Start, All Programs, Startup open the Startup folder and
double click on the Wizard 2 Service Monitor. The red PC icon will appear in the lower
right corner of the main Windows display. Double click to open the Wizard Service Broker
Monitor. Click on Start broker. Minimize the window. The icon is now green.
5. How to stop the broker:
a. If the Green PC icon is present in the lower right corner of the Windows display, double
click on the icon. The Wizard Broker Service Monitor window will open. Click on stop
broker. Minimize the window. The icon is now Red.
b. If the icon is not present, go to Start (windows icon in lower left corner of display), All
Programs, Startup open the Startup folder and double click on the Wizard 2 Service
Monitor. The Green PC icon will appear in the lower right corner of the main Windows
display. Double click to open the Wizard Service Broker Monitor. Click on Stop broker.
Minimize the window. The icon is now red.
F/C Unit of Measure
• The system can be set to display all temperature readings in Fahrenheit or Celsius.
• Go to Options, Settings and select.
Viewing Data
Loggers Tab
• The loggers tab displays data for all loggers.
• Data can be filtered by clicking on View Filter in the lower left corner of the Logger tab window.
o Live Data is the default filter view – Including all current readings
o Status – Indicates if a logger is Active or Inactive
o General Info – Logger Model, Serial Number, Calibration Dates and settings
o Config Data – Connect Via, Sample Rate
o Alarm Settings – Alarm Min/Max settings and delay settings
• Right click on any logger to Edit, Customize Graph and view a Live or Historical Graph for that
logger.
Customize Graph
• Select Customize Graph set and save graph format.
• Once saved the format options will display every time that logger is opened in graph view.