10
PowerMic™ Microphones Installation Guide
PowerScanner
™
Microphone
The PowerScanner microphone connects to a serial
port on your computer. Before you install the
PowerScanner, be sure you have installed the Turtle
Beach Santa Cruz sound card and its driver files
following the manufacturer’s instructions. The drivers
are provided with your sound card, or you can
download them from the Dictaphone Web site.
To download the sound card drivers from the
Dictaphone Web site:
1. Start Internet Explorer and go to the Dictaphone
Web site at www.dictaphone.com
.
2. Click the Support link in the top navigation bar
on the Dictaphone home page.
3. On the Support page, scroll down and click the
Downloads link. You can go directly to the
Downloads page at http://www.dictaphone.com/
support/productService/downloads.asp.
4. Click the heading PowerMic Microphones.
5. Click the link for your computer’s operating
system under the heading PowerScanner Serial
Microphone to download the correct drivers.
6. When prompted to do so, click Save to save the
installation file on your computer.
To Next Page
Loading...