15
Installing the Microphone Wizard Program
Installing the Microphone Wizard Program
The Microphone Wizard (MicWiz.exe) is a program
you use to test your microphone.
If you have the PowerScanner serial microphone, it is
required that you use the MicWiz program to test your
microphone before using it.
If you have the USB PowerMic microphone or the USB
PowerMic+Scanner microphone, it is recommended,
but not required, that you use the MicWiz program to
test your microphone.
The Microphone Wizard can be installed from the USB
Microphone Driver CD (see below) and is also
available for download from the Dictaphone Web site
(refer to page 17).
To install the Microphone Wizard application from
the USB Microphone Driver CD:
1. Insert the USB Microphone Driver CD into your
computer’s CD-ROM drive.
2. Start the Windows Explorer application.
To open Windows Explorer, select
Start >
Programs > Accessories > Windows Explorer.
OR
Select Start > Run..., type explorer.exe, and
then click OK.
To Next Page