To Next PageTo Next Page
Need help?Do you have a question about the DieHard 200.71220 and is the answer not in the manual?
General| Brand | DieHard |
|---|---|
| Model Number | 200.71220 |
| Type | Automatic Battery Charger |
| Input Voltage | 120V AC |
| Maintain Amperage | 2A |
| Automatic Shutoff | Yes |
| Display Type | LED Indicators |
| Charging Amperage | 10A |
| Battery Types Supported | AGM, Gel |
| Safety Features | Reverse Polarity Protection |
| Cord Length | 6 ft |
| Output Voltage | 6V/12V DC |
Key safety reminders and advice for using the battery charger effectively and safely.
Essential safety measures for personal protection when working with lead-acid batteries.
Instructions for permanently attaching the quick disconnect harness to a small battery.
Guidelines for routing and securing output cords to prevent damage and ensure safety.
Details on the 120V receptacle requirement and electrical shock hazard warnings.
Recommendations and guidelines for using an extension cord with the charger.
How to set the selector switch for 6 VOLT or 12 VOLT batteries.
Detailed steps for charging a battery while it remains installed in the vehicle.
Step-by-step guide for charging a battery that has been removed from the vehicle.
Step-by-step guide for operating the charger and understanding LED indicator lights.
Information on charging times, battery capacity, and handling overload conditions indicated by the red LED.
