To Next PageTo Next Page
Need help?Do you have a question about the DieHard platinum 200.71227 and is the answer not in the manual?
General| Brand | DieHard |
|---|---|
| Model | platinum 200.71227 |
| Category | Battery Charger |
| Language | English |
Warnings about lead-acid batteries generating explosive gases and the need to follow instructions exactly.
General safety warnings related to cord handling, ventilation, and battery charging practices.
Wear eye/clothing protection, have aid and cleaning supplies ready for battery work.
Remove metal, avoid sparks/flames, operate in ventilated area to prevent hazards.
Steps for identifying battery voltage, cleaning terminals, and wearing safety glasses.
Step-by-step guide for connecting the charger to a battery in a vehicle, including system grounding types.
Procedure for safely unplugging the charger and removing output clamps.
Instructions on connecting battery clamps to the positive and negative posts.
Steps for connecting, cranking the engine, and disconnecting after starting.
Explanation of the charger's modes during the start sequence: Wait for cranking, Cranking, and Cool Down.
How to use the switch to set the digital display to Battery %, Voltage, or Alternator %.
Selection of battery types (Regular, Deep Cycle, AGM/Gel, DieHard Platinum).
Addresses the issue of the battery being connected but not charging.
Explains why the CHECK LED flashes and how to resolve it.
