To Next PageTo Next Page
Need help?Do you have a question about the DieHard 200.71226 and is the answer not in the manual?
Highlights the danger of explosive gases from lead-acid batteries and essential precautions.
Steps for ensuring the battery is ready for charging, including terminal cleaning.
Step-by-step guide for charging a battery while it remains installed in the vehicle.
Instructions for charging a battery that has been disconnected from the vehicle.
Procedure for using the charger to jump-start a vehicle with a low battery.
Details on how the charger performs charging and its different states.
Explanation of how to use the display mode switch for different readouts.
Step-by-step instructions for using the built-in battery testing function.
Procedure for testing the vehicle's alternator output.
Highlights the danger of explosive gases from lead-acid batteries and essential precautions.
Steps for ensuring the battery is ready for charging, including terminal cleaning.
Step-by-step guide for charging a battery while it remains installed in the vehicle.
Instructions for charging a battery that has been disconnected from the vehicle.
Procedure for using the charger to jump-start a vehicle with a low battery.
Details on how the charger performs charging and its different states.
Explanation of how to use the display mode switch for different readouts.
Step-by-step instructions for using the built-in battery testing function.
Procedure for testing the vehicle's alternator output.
General| Input Voltage | 120V AC |
|---|---|
| Type | Automatic |
| Output Voltage | 6V/12V DC |
| Output Current | 2A |
| Battery Type | Lead Acid |
| Charging Time | Varies by battery capacity and charge level |
| Safety Features | Overcharge protection |
| Charging Modes | Trickle charge |
