Why won't my DieHard Remote Starter power my 12V device?
If your DieHard Remote Starter won’t power your 12V device, first ensure the 12V device is actually turned on. Also, check the unit's battery charge by pressing the Battery Status button. If the device draws more than 20A or has a short circuit, disconnect it; the internal breaker will reset in a minute or two, after which you can try the device again.
What to do if my DieHard Remote Starter won't jump start my car?
If your DieHard Remote Starter won’t jump start your car, first ensure the clamps have a solid connection to both the battery and frame, and that these connection points are clean. Reversing the connections can also cause this issue, so disconnect and reverse the clamps. Check the charge status by pressing the Battery Status button—if the unit's battery is low, it needs charging. If the problem persists, your vehicle’s battery may be defective and require inspection.
General| Brand | DieHard |
|---|---|
| Model | DH155 |
| Category | Remote Starter |
| Language | English |
To Next Page
