To Next PageTo Next PageWhy won’t the battery in my DieHard Remote Starter hold a charge?
If the battery in your DieHard Remote Starter won’t hold a charge, it could indicate that the battery is bad and unable to accept a charge. In this case, you should replace the battery.
What to do if my DieHard Remote Starter won’t jump start my car?
If your DieHard Remote Starter won’t jump start your car, there might be a few reasons. First, ensure that the jump start ON/OFF switch is in the ON position. Next, check the battery status by pressing the Battery Status button on the front of the unit. The LEDs will indicate the charge status. Also, verify the connections aren't reversed; if they are, disconnect the Portable Power and reverse the clamps. If the issue persists, the vehicle's battery might be defective, so have it checked by a professional.
What to do if my DieHard Remote Starter won’t power my 12V device?
If your DieHard Remote Starter won’t power your 12V device, start by ensuring the 12V device is turned on. Then, check the battery charge status of the Portable Power by pressing the Battery Status button. If the device still doesn't power on, it might be drawing more than 15A or have a blown fuse, in which case you should contact a qualified service technician to replace the fuse.
General| Remote Start | Yes |
|---|---|
| Keyless Entry | Yes |
| Security System | Yes |
| Battery Life | Up to 1 year |
| LED Indicator | Yes |
| Compatibility | Most vehicles |
General warnings about explosive gas hazards when working near lead-acid batteries.
Key instructions to prevent product damage, fire, or injury during operation.
Recommendations for user protection, including eye protection and handling acid spills.
Lists and identifies the main components of the DieHard Portable Power 950.
Describes how to interpret LED indicators to check the internal battery's charge status.
Step-by-step guide for charging the internal battery using an extension cord.
Instructions and warnings for charging the battery using a vehicle's 12V DC outlet.
Detailed steps for using the jump starter function on vehicles.
Guide on connecting and using devices with the 5V DC USB port.
Instructions for powering accessories using the 12V DC outlet and estimated run times.
Steps for attaching the hose and operating the air compressor for inflation.
Provides approximate times for inflating common items like tires and balls.
Basic cleaning and recharging recommendations to maintain the unit.
Lists common problems with jump starting, powering devices, and charging.
