EasyManua.ls Logo

DieHard DH6L - Display Messages

DieHard DH6L
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
13. DISPLAY MESSAGES
SELECT BATTERY TYPE (No LED lit) – Waiting for user to select battery type.
The charger will remember the battery type selected.
LITHIUM ION BATTERY-PRESS AGAIN FOR LEAD-ACID (No LED lit) –Charging
will begin for lithium-ion battery type. Press again to change to lead-acid battery type.
LEAD-ACID BATTERY-PRESS AGAIN FOR LITHIUM ION (No LED lit) –Charging
will begin for lead-acid battery type. Press again to change to lithium-ion battery type.
CONNECT CLAMPS TO LITHIUM ION BATTERY (No LED lit) Plugged into the AC
outlet, and lithium-ion battery type is selected, without the clamps connected to a battery.
CONNECT CLAMPS TO LEAD ACID BATTERY (No LED lit) – Plugged into the AC
outlet, and lead-acid battery type is selected, without the clamps connected to a battery.
WARNING CLAMPS REVERSED (No LED lit) – Plugged into the AC outlet and
the clamps are connected backwards to a battery.
ANALYZING LEAD-ACID BATTERY (or) ANALYZING LITHIUM ION BATTERY
(Green LED lit) – Plugged into the AC outlet, and when rst connected correctly to a battery.
CHARGING 12V – xx% (Green LED lit) – Plugged into the AC outlet and correctly
connected to a discharged 12V battery.
FULLY CHARGED AUTO MAINTAINING (Green LED pulsing) – Plugged into the
AC outlet and correctly connected to a fully charged battery.
CHARGE ABORTED-BAD BATTERY (Green LED ashing) –
Circumstances that could cause an Abort situation during charging:
The battery is severely sulfated or has a shorted cell and can’t reach a full charge.
The battery is too large or there is a bank of batteries and it doesn’t reach full
charge within a set time period.
Circumstances that could cause an Abort situation during maintain:
The battery is severely sulfated or has a weak cell and will not hold a charge.
There is a large draw on the battery and the charger has to supply its maximum
maintain current for a 12 hour period to keep the battery at full charge.
BATTERY DISCONNECTED (No LED lit) – After charging has begun, the charger
has lost its connection to the battery.

Related product manuals