-18-
English
Italiano Dansk Svenska
7. Maintenance
Flow sensor and temperature sensor may not be connected from
the integrator.
After repair work, perform recalibration in an accredited testing
agency.
Information concerning reconditioning or maintenance can be
found in the processing concept (this will be made available for
laboratories and testing agencies upon request).
8. Disposal
The meter contains a lithium battery, which is not rechargeable.
Do not use force to open the battery. It must never come into
contact with water, short-circuited or exposed to temperatures
over 75 °C.
Empty batteries and no longer required electronic devices or components
are hazardous waste.
This device must not be disposed together with the domestic waste.
Return it to the manufacturer for recycling.
9. Declaration of conformity for MID meters
See from page 65 onwards.
Further information as well as the actual declaration of conformity are
available at:
http://www.diehl.com/en/diehl-metering/products-solutions/product-
download/
Please select the partner "Diehl Metering GmbH" and the product area
"Thermal Energy Metering".
To Next Page
Loading...
