-5-
English
Italiano Dansk Svenska
1. General
This guide is intended for trained specialised personnel. For this reason no
basic working steps are included.
The meter tamper-evident seal must not be damaged!
A damaged seal will result in immediate invalidation of the factory
warranty and verication or declaration of conformity. The cables
supplied with the meter must neither be shortened, extended
nor changed in any other way.
The regulations on the use of energy meters must be observed!
The installation must only be carried out by a specialist company.
The personnel must be trained in the installation and handling of
electrical equipment.
Medium
Water according to AGFW-Worksheet FW510 (the lifecycle of the
meter may be impaired if not observed).
The temperature range depends on variant and nominal size.
Detailed user guide available at http://www.diehl.com/en/diehl-metering/
products-solutions/product-download/.
This user guide must be observed without fail.
The IZAR@SET software is used for readout/parametrization and is
available online at http://www.diehl.com/en/diehl-metering/products-
solutions/product-download/.
Please select the partner "Diehl Metering GmbH" and the product area "
Metering Systems".
To Next Page
Loading...
