It reports current consumptions lower than initial set points
on at least one channel (blinking).
>> Paragraph ERRORS
It indicates over temperature fault in at least one fan motor
(blinking).
>> Paragraph ERRORS
It enables switching between the AUTOMATIC, MANUAL
and SCAN functions.
>> Paragraph SET AUTO/MAN/SCAN
Enter: In the programming phase it allows confirmation of
an entered data.
Tests: It allows the display and relay test.
>> Paragraph TEST FUNCTION
NAVIGATION KEYS: They allow scrolling through the
various menu pages and increasing/decreasing in
programming values.
CAL: It runs control unit auto calibration.
>> Paragraph CALIBRATION
PROGRAM: Enter the control unit programming function.
>> Paragraph PROGRAMMING
ALARMS RESET: It allows alarm reset.
>> Paragraph RESET
RESET DEFAULT: It allows alarms to be reset and factory
settings restored.
>> Paragraph RESET
To Next Page
Loading...
