DIEL AT200 - Error Codes and Descriptions; Overcurrent Error; Undercurrent Error; Overtemperature Error

AT 200 ENG
- 28 -
ERRORS
OVERCURRENT: It indicates that current
consumptions are greater than the value measured
during calibration. The FAULT relay switches.
Ventilation line stops and the respective channel is
displayed like this .
UNDERCURRENT: Indicates that current
consumptions are lower than the value measured
during calibration. The FAULT relay switches.
Ventilation line doesn’t stop.
OVERTEMP: Indicates over temperature fault in at
least one fan motor. The FAULT relay switches.
Ventilation line stops and the respective channel is
displayed like this .