16 17
12. SETTING RAIN DELAY – OPTIONAL FEATURE
The Rain Delay setting is used to temporarily suspend all irrigation for a defined
number of days. For example, during rainy weather regularly scheduled programs
can be turned off from 1-99 days. At the end of the designated period, regularly
scheduled programming will resume automatically.
To set a temporary suspension of the program:
1. Press the
button until the icon and OFF appear.
2. Press the
button and OFF starts flashing.
3. To set the desired temporary suspension of the program (1-99 days), press
or
.
4. The temporary suspension of the program can be cancelled at any time by
re-entering Rain Delay screen and changing the setting to OFF. (Press
or
until OFF appears.)
2. Press the button, and 0:00 (or the last run time programmed) appears with
hours flashing.
3. To set a desired watering run time in hours, press
or and select the
number of hours.
4. If only watering duration in minutes is required, press to skip the hour digit,
and the minutes will start flashing.
5. To set the desired watering duration in minutes (example of 10 minutes), press
or to select minutes. When programming the watering duration, if you
are set to water on specific days of the week, the screen will also show the days
the timer will operate with an underline.
At this point the controller’s normal programming is concluded.
Press the
button to proceed to the next step RAIN DELAY or to review
the program or to exit.
To Next Page
Loading...
Need help?
General
