To Next PageTo Next Page
Need help?Do you have a question about the DIG 710 Series and is the answer not in the manual?
General| Brand | DIG |
|---|---|
| Model | 710 Series |
| Category | Controller |
| Language | English |
Provides a general description of the DIG 700 series single and four-station battery operated controllers.
Identifies the various components and parts of the DIG 700 series controllers.
Lists the necessary components required for the proper installation of 710 and 740 series controllers.
Details the procedure for correctly installing the 9-volt battery into the controller's compartment.
Explains how to mount the controller either directly onto a valve or onto a wall.
Step-by-step guide for mounting the controller onto the valve assembly.
Instructions for securely mounting the controller bracket to a wall.
Details the assembly process for the valve and solenoid components.
Specific instructions for installing the 740.000 four-station controller.
Guide for assembling and installing the DC actuator onto various valve types.
Instructions on how to connect and use an external sensor with the controller.
Explains the programming features, button functions, and steps for setting schedules.
Procedure for setting the controller's current time and day of the week.
How to switch between AM/PM and 24-hour time formats on the controller.
Procedure for selecting individual valves on the 740.000 four-station controller.
Configuring the length of time each valve will remain open during watering.
Determining how the controller operates based on days of the week or cyclical intervals.
Setting specific days for watering operations.
Programming the controller for a single irrigation event within a cyclical period.
Setting intervals for watering every X number of days in cyclical mode.
Programming up to four start times for watering according to the days of the week.
Setting a single start time and optional delay for cyclical or one-time watering.
How to manually operate the valve for a set irrigation period.
Temporarily suspends irrigation schedules without deleting stored data.
Adjusts watering durations by a percentage without altering programmed schedules.
Indicates sensor status and how it affects manual operation.
Indicates if program data is missing, disabling automatic valve operation.
Alerts user to low battery levels, requiring prompt replacement.
Indicates critically low battery, causing display to vanish and valves to close.
Guidance on routine maintenance, common problems, and repair solutions.
Details DIG CORPORATION's warranty coverage, limitations, and claims process.
Information on how to contact DIG's Technical Service Team for support.
