What does it mean if the Ethernet Activity LED blinks on Digi Server?
If the Ethernet Activity LED on your Digi Server blinks when there is active traffic on the LAN connection, monitor for normal operation.
What to do if the Digi Server power LED is not illuminated?
If the power LED on your Digi Server is not illuminated when power is applied, the fuse may be blown. Replace the fuse.
How to enable the Find Me LED on Digi Server?
To enable the Find Me LED on your Digi Server, use the command line or navigate to Administration > Activate Find Me LED in the web interface.
Crucial safety guidelines for electrical current and device handling.
Overview of interfaces for device configuration, monitoring, and administration.
Details on enabling/disabling network services for security and access control.
Procedures for configuring IP addresses via DHCP, Auto-IP, or CLI.
Steps to access the device's web interface using a browser or utility.
Using the web interface for device configuration and monitoring.
How to connect and issue commands via CLI for device management.
Performing administrative tasks like file management, firmware updates, and rebooting.
Configuring device settings using CLI commands.
Using CLI commands for displaying info, managing connections, and configuring the product.
Recommended process for defining and addressing latency issues in networks.
Strategies to optimize network and transport layers for reduced latency.
Detailed hardware specifications for Digi Connect ES and ConnectPort TS products.
Documentation of regulatory compliance and certifications for the product family.
Resources for resolving issues, including support site, forums, and tickets.
Explanation of LED indicators for system status, link integrity, and activity.
General| Power Supply | 3.3 VDC |
|---|---|
| Ethernet Ports | 1 |
| Serial Ports | 1 |
| Network Interface | 10/100Base-T Ethernet |
| Serial Interface | RS-232/485 |
| Operating Temperature | -40°C to 85°C |
| Product Type | Embedded Device Server |
| Protocols | TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, SNMP, Telnet |
To Next Page
