Digi Connect ME User Manual

Digi Connect and ConnectPort TS Family command-
line interface
You can issue commands from the command line to configure, manage, and monitor Digi Connect and
ConnectPort TS Family devices. For a description of the complete command set, see the Digi Connect®
Family Command Reference.
This section gives some basics for using the command line interface, as well as listing some commonly
used commands by function.
Configuration through the command line 115
Management through the command line interface 116
Administration 122
Digi Connect Family and ConnectPort TS Family
114

Digi Connect ME Specifications

General

Power Supply	3.3 VDC
Ethernet Ports	1
Serial Ports	1
Network Interface	10/100Base-T Ethernet
Serial Interface	RS-232/485
Operating Temperature	-40°C to 85°C
Product Type	Embedded Device Server
Protocols	TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, SNMP, Telnet