Digi Connect ME

Digi Connect and ConnectPort TS Family web interface Configuration through the web interface
Digi Connect Family and ConnectPort TS Family
60
n TCPSockets for TCPclient (Automatic Connection): In a TCP client configuration, the
Digi device server automatically establishes a TCP connection to an application or
network device. See Automatic TCP connections (Automatic Connection) for more
information.
To assign a TCP Client (Automatic Connection) profile to a serial port:
a. Under TCPClient Settings, select the Automatically establish
TCPconnections check box.
b. Select the Connect option that describes when the TCP connection will be
initiated.
c. Type the IP address or DNS name of the destination server in the Server
(name or IP) field.
d. Select one of the following options from the Service drop-down list:
l Raw TCP
l Rlogin
l Secure Sockets
l Telnet
l SSH