Digi ConnectPort LTS 16 Command Reference

Command descriptions set rtstoggle
ConnectPort® LTS Command Reference
102
set rtstoggle
Purpose
RTS toggle is used to raise RTS when sending data. This command enables or disables RTS toggle on a
given serial port, and displays current RTS toggle settings.
Required permissions
For products with two or more users, to use this command, permissions must be set to one of the
following:
n For a user to display the RTS toggle settings for the line on which they are logged in: “set
permissions s-rtstoggle=r-self”
n For a user to display the RTS toggle settings for any line:
n “set permissions s-rtstoggle=read”
n For a user to display and set the RTS toggle settings for the line on which they are logged in:
“set permissions s-rtstoggle=rw-self”
n For a user to display the RTS toggle settings for any line, and set RCI serial settings for the line
on which the user is logged in:
n “set permissions s-rtstoggle=w-self-r”
n For a user to display and set the RTS toggle settings on any line:
n “set permissions s-rtstoggle=rw”
n For a user to display and set the RTS toggle settings on any line:
See "set permissions" for details on setting user permissions for commands.
Syntax
Enable or disable RTS toggle
set rtstoggle port= range
[state={on|off}]
[predelay= delay ]
[postdelay= delay ]
Display current RTS toggle settings
set rtstoggle [port= range ]
Options
port=range
Used to specify the serial port. Optional on a single-port device.
state={on|off}
Used to enable or disable the RTS toggle feature.

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English