Digi ConnectPort LTS 16 Command Reference

Command descriptions set switches
ConnectPort® LTS Command Reference
130
Configure a half-duplex EIA-485 endpoint
#> set switches port=1 mode=485 wires=two
termination=on
Configure a full-duplex 422 interior node
#> set switches port=1 mode=485 wires=four
termination=off
See also
n display: The “display switches” command displays the current switch settings.
n revert: The “revert switches” command reverts the “set switches” configuration.

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English