Command descriptions set web
ConnectPort® LTS Command Reference
158
set web
Purpose
Configure the timeout value for the web interface.
Required permissions
Permissions must be set to one of the following:
n For a user to display the Web server settings:
“set permissions s-service=read”
n For a user to display and set the Web server settings:
“set permissions s-service=rw”
Syntax
Set time-out value for Web server
set web [timeout=0-1140]
Display Web server settings
set web
Options
timeout=0-1140
Specifies the time-out value in minute for Web server login.
If there is no user input during time-out, user will be logged out from Web server automatically.
Setting the timeout to 0 means that user will not be logged out once logged in.
Example
#>set web timeout=60
To Next Page
Loading...
Need help?
General