Command descriptions set nfs
ConnectPort® LTS Command Reference
76
path=pathname
Specifies the full path of directory on NFS server.
timeout=5-3600
Specifies a time out value for waiting response from NFS server.
interval=5-3600
Specifies an interval to check the status of NFS server.
alert_state={off|on}
Specifies whether the alert for changing of the status of NFS service will be enabled.
on
Enable the alert.
off
Disable the alert.
Default is off.
alert_description=string
Specifies the description for the alert.
alert_priority={normal|high}
The priority of the alert when the alert type is email.
normal
The alert is sent with normal priority.
high
The alert is sent with high priority.
The default is “normal.”
alert_type={email|snmptrap|all}
Used to determine what kind of an alarm is sent: an e-mail alarm, an SNMP trap or
both.
For SNMP traps to be sent, the IP address of the system to which traps are sent must
be configured, by issuing a “set snmp” command with the “trapdestip” option. See "set
snmp".
email
An email alarm is sent.
snmptrap
An SNMP trap is sent. If snmptrap is specified, the “subject” text is sent with the alarm.
all
Both an email alarm and SNMP trap are sent.
The default is “email.”
alert_subject=string
To Next Page
Loading...
Need help?
General