Command descriptions set permissions
ConnectPort® LTS Command Reference
83
Permissions for the “set trace” command. (See "set trace")
s-udpserial={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set udpserial” command. (See "set udpserial")
s-usb ={none|read|rw}
Permissions for the “set usb” command. (See "set usb")
s-user={none|read|rw}
Permissions for the “set user” command. (See "set user")
s-xbee={none|read|rw}
Permissions for the “set xbee” command.
s-webui ={none|read|rw}
Permissions for the “set web” command. (See "set web")
Examples
Set group permissions
#> set permissions type=group name=gurus newpass=rw-self s-user=read
Set user permissions
#> set permissions id=1 newpass=rw s-user=rw s-group=rw
See also
n set user
n set group
n show
n User permissions in ConnectPort LTS products