Command descriptions set ppp
ConnectPort® LTS Command Reference
93
Remove a PPP setting.
index=1-64
PPP user index.
connection_type={none|incoming|outgoing}
The connection type.
none
Disable PPP settings for the user.
incoming
Used for inbound PPP connections. The ConnectPort LTS product will receive
connections from other hosts for this user.
outgoing
Used for outbound PPP connection. The ConnectPort LTS product will dial-out to
establish PPP connections with external hosts using this user information.
newname=new username
User name for new PPP user added
user=username
User name for incoming or outgoing PPP connection.
password=password
Password for user.
pppauth={none|chap|pap|both}
Determines whether authentication is required for PPP connection and, if so, what kind.
none
The remote user does not require PPP authentication
chap
Challenge Handshake Authentication Protocol (CHAP) authentication is required.
pap
Password Authentication Protocol(PAP) authentication is required.
both
Both CHAP and PAP authentication are required.
The default is “none”
ipaddrmode={ippool|negotiated|static}
The mode of IP address for the peer in an incoming PPP connection.
ippool
The IP address of remote peer will be assigned from the ippool automatically.
negotiated
To Next Page
Loading...
Need help?
General