Configure the device using the ConnectPort LTS web interface Configuration through the web interface
Digi ConnectPort LTS User Guide
84
n The user's name and password.
n The device interfaces that the user can access, such as the command-line interface or web
interface.
n The permissions the user has to access and configure the device.
Multi-user model implemented in ConnectPort LTS
The user model in ConnectPort LTS device determines the commands that users can issue.
ConnectPort LTS supports multiple users. ConnectPort LTS devices use a more-than-two-user model.
You can define up to 32 users. Characteristics of this model include:
n The root user is a user name or account that by default has access to all configuration settings
on the Digi device. The root user is responsible for system administration. By default, the all
permissions for the root user are enabled and the root user can issue all commands. The root
user is the first user to access and configure the Digi device. The first user to access the Digi
device can choose to disable some of the default root permissions. You are prompted to
change your password the first time you sign in and after a factory reset.
n The admin user is a user name or account that has access to configuration settings defined by
the root user for administrative purposes. The admin user is initially inactive. To activate the
admin user, you must login to the web interface as root and then assign a password to the
admin user. See User Configuration.
To Next Page
Loading...
Need help?
General