Digi ConnectPort LTS Series User Manual

Configure the device using the ConnectPort LTS web interface Configuration through the web interface
Digi ConnectPort LTS User Guide
85
n The ruser is a user name or account used by authentication when the user is not locally
defined. The ruser represents the remote user. Use the user named ruser to set permissions
for users authenticating remotely via Remote Authentication Dial-In User Service (RADIUS)
and/or Lightweight Directory Access Protocol (LDAP).
The default RADIUSuser defines the permissions for all RADIUSusers who do not have a local
definition. You can customize the permissions for RADIUSusers who do not have a local
definition.
Users that have a local definition and connect to services that are set up for RADIUS:
l Have permission characteristics of locally-defined users.
l User authentication uses the specified RADIUS authentication method. See description of
Authentication Method in Authentication Settings for more information.
The RADIUS attributes supported by ConnectPort LTS are as follows:
l For authentications:
o
User-Name
o
User-Password
o
NAS-Port-Id
o
Framed-Protocol
l For accounting:
o
Acct-Status-Type
o
User-Name
o
User-Password
o
NAS-Port-Id
o
Acct-Session-ID
o
Acct-Session-Time
o
Service-Type
n Users are defined by the user settings in the web interface or the set user command in the
command-line interface.
n You can define additional users as needed.
n set user, set group, and other commands are described in detail in the ConnectPort LTS
Command Reference.
Users
The Users page displays a list of configured users and groups. Use the page to configure users and
groups.
n Configure Users:
l User Name: Lists the configured users. To edit a user, such as change the password, click a
user's name.

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English