Digi SM-5300 Series - Typical Operation; Product Setup

M o d e l S M - 5 3 0 0 U s e r M a n u a l | 22
Product Information
––––––––––––––––––––––––––––––––––––
1.4 Printer Setting
5. Push back the cassette into the main unit until a lock sound is heard, For SM5300LL insert
new linerless roll then pull linerless point to thermal head.
SM5300P
SM5300LL
Push the
Cassette
6. Close the printer door by pushing at the lower area of the printer door until a lock sound is
heard. Refer to diagram below:
SM5300P
SM5300LL
Push printer door to
lock
7. Depress [FEED] key to feed label/receipt, for SM5300LL the printer door will auto feed the
linerless when printer door is lock.