Digi SM-5300 Series - Page 29

M o d e l S M - 5 3 0 0 U s e r M a n u a l | 28
Typical Operation
––––––––––––––––––––––––––––––––––––––––
2.3 Registration Mode
3. PLU Call Up by Preset Key of Registration Mode
To enable this function, the PLU must assign on the Preset Key of Registration Mode in advance
(Please refer to PLU Program and Barcode Programming on SM5300 Operation Manual (Part 1 -
Main) – Edition 01 [DOC]).
OPERATION
DISPLAY
1.
In REGISTRATION MODE, touch the
PRESET KEY with the desired PLU assigned
from Registration Mode Preset Key.
(e.g. The 1
st
Preset Key – Dragon Fruit)
Note: Press [C] key on keypad to clear the PLU
data.