Digi SM-5300 Series - Page 52

M o d e l S M - 5 3 0 0 U s e r M a n u a l | 51
Typical Operation
–––––––––––––––––––––––––––––––––––––––
2.3 Registration Mode
2. Tare Subtraction
SPEC 142B005 "One Touch Tare subtraction" must be set to "Allow" in advance, to enable
this function.
OPERATION
DISPLAY
1.
In REGISTRATION MODE, put weight on the
platter e.g. 200g
Note: Also can use digital tare.
2.
Press [TARE] key to subtract the tare
weight
3.
Remove e.g. 100g from the platter.
Note: For Digital Tare, subtracted tare value
should not be bigger than the total tare
value.
4.
Press [TARE] key to subtract the tare
weight