Digi SM-5300 - SM-5300 P Component Disassembly

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 115
OPERATION
DISPLAY
15.
Method 1: Assign by entering the existing
Group Number by using the keypad.
Enter the Group Number by the keypad.
(e.g. 1 – Group One)
Touch the desired preset key.
16.
Method 2: Assign by browsing the existing
Group Data.
Touch [GROUP] area to browse the
existing Group Data.
17.
Touch the desired Group key. (e.g. Group
8)
Touch the desired preset key.
18.
Touch [GROUP] key until the word MG
display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE,
LABEL FORMAT, KEYPAD KEY, TEXT,
IMAGE and COLOR