Digi SM-5300

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 117
OPERATION
DISPLAY
23.
Method 1: Assign by entering the existing
Traceability Number by using the keypad.
Enter the Traceability Number by the
keypad.
(e.g. 4)
Touch the desired preset key.
24.
Method 2: Assign by browsing the existing
Traceability Data.
Touch [TRACEABILITY] area to browse
the existing Traceability Data.
Note: Touch or key for more
selection.
25.
Touch the desired Traceability key (e.g. 1).
Or entry Traceability number by keypad then
touch [ENTER] key
Touch the desired preset key.
26.
Touch [TRACEABILITY] key select the
word TARE display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE,
LABEL FORMAT, KEYPAD KEY, TEXT,
IMAGE and COLOR