Digi SM-5300 - Page 173

Department File
––––––––––––––––––––––––––––––––––––––––––––––––––––
5.2 Copy a Department File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 172
5.2 Copy a Department File
The programmed Department data can be easily copied into a new Department. The function is
very useful to save time or avoid mistake for the similar Department data programming, especially
in case of long description of Department Name.
OPERATION
DISPLAY
1.
In Department Programming Mode, enter a
new Department number. (e.g. 3)
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
2.
Touch the desired Department data to copy
from.
(e.g. DEPT 2)
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.