––––––––––––––––––––––––––––––––––––––––––––––––––––
6.1 Main Group Program File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 175
Main Group File
6.1 Main Group Program File
Main Group is the middle category. All Main Groups can be assigned to a Department. The Main
Group file is used categorizing the PLU. Main Group Number between of 1 ~ 997 is available for
programming. Main Group Number 997 is automatically assigned to PLU that are not linked to any
Main Group Number. Tax can be assigned to every Main Group. The assigned Tax will apply for
all PLU assigned to the Main Group. Maximum 16 characters can be entered per Main Group and
with 1 line.
Note: 1. Main Group Number 98 – 99 is set by default:
2. Non-PLU data (Weighing items) will be assigned to Main Group Number 998
3. Non-PLU data (Non-Weighing items) will be assigned to Main Group Number 999
4. The Main Group names programmed are not printed on the label or receipt but are for reporting.
Touch [PROGRAMMING] key follow by
[PLU RELATED] key to enter to
Programming Mode.
Touch [MAIN GROUP] key.
Note :
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed MG File will be listed in
MAINGROUP PROGRAMMING Display
Screen.
3. Display Screen also used to browse
existing MG Files using the scroll bar and
to select file for modification
To Next Page
Loading...
Need help?
General
