Digi SM-5300 - Page 185

Ingredient File
––––––––––––––––––––––––––––––––––––––––––––––––––––
7.2 Copy an Ingredient File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 184
7.2 Copy an Ingredient File
The programmed Ingredient data can be easily copied into a new Ingredient. The function is very
useful to save time or avoid mistake for the similar Ingredient data programming, especially in case of
long description of Ingredients.
OPERATION
DISPLAY
1.
In Ingredient Programming Mode, enter a
new Ingredient number. (e.g. 7)
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
2.
Touch the desired Ingredient data to copy
from.
(e.g. Ingredient # 4)
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.