–––––––––––––––––––––––––––––––––––––––––––
8.1 Program Special Message File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 187
SPECIAL MESSAGE FILE
8.1 Program Special Message File
Special Message texts, programmed in this file can be used as a description on the label such as
recipes, which can be assigned to any PLU that uses a format with a Special Message print area. The
print area size, set on the format used, will decide the number of lines that can be programmed.
The maximum number of Special Message lines is 8. It is possible to program up to 16 Special
Message files. Since standard format S, A, B, C and T1 ~ T12 does not have a print area set for
Special Message, Special Message cannot be printed when using these formats. To print Special
Message on the label, it is required to use a Free Format with a Special Message print area
programmed.
Touch [PROGRAMMING] key follow by
[PLU RELATED] key to enter to
Programming Mode.
Touch [SPECIAL MESSAGE] key.
Note:
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed Special Message File will
be listed in SPC. MESSAGE
PROGRAMMING Display Screen.
3. Display Screen also used to browse
existing Special Message Files using the
scroll bar and to select file for
modification
To Next Page
Loading...
