––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 209
IMAGE FILE
11.1 Program Image File
Image is used to make attractive looking labels. Up to 9999 images can be store in the SM-5500’s
memory. Any bmp files can be use as Image file where need to be store in the Linux directory in
/opt/pcscale/files/img.
Note: To make Image available for selection in programming, set image as:
Example 1: For MG1, create image for example from 1000 – 1999for MG1 and
For MG2, create images from 2000 – 2999.
Example 2: For other selection image can be create any number and the example 1 image also will
be included.
Touch [PROGRAMMING] key follow by
[PLU RELATED] key to enter to
Programming Mode.
Touch [IMAGE] key.
Note:
1. Touch [MENU] key to return back to
Programming Mode.
2. Touch [ARROW DOWN] or [ARROW
UP] for more selection.
3. All programmed Image File will be listed
in IMAGE PROGRAMMING Display
Screen.
4. Display Screen also used to browse
existing Image Files using the scroll bar
and to select file for modification
5. Image from 1 – 99 is default image.
To Next Page
Loading...
