Digi SM-5300 Operation Manual

Shop Name File
–––––––––––––––––––––––––––––––––––––––––––––––––––––
12.2 Copy Shop Name File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 218
12.2 Copy a Shop Name File
The programmed Shop Name data can be easily copied into a new Shop Name. This function is very
useful to save time or avoid mistake for the similar Shop Name data programming.
OPERATION
DISPLAY
1.
In Shop Name Programming Mode, enter a
new Shop Name number. (e.g. 11)
Touch [COPY] key.
2.
Touch the desired Shop Name data to copy
from.
(e.g. Shop Name #1)
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.

Digi SM-5300 Specifications

General

Brand	Digi
Model	SM-5300
Category	Scales
Language	English