–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 221
TAX FILE
13.1 Program Tax File
This function enables you to program consumption tax rate included or excluded in the price. Up to 10
Tax Numbers (1~10) can be programmed. The programmed Tax rates that are linked t a Main Group
will apply for all PLU in the Main Group. Tax Rates can be entered between 00.00% and 99.99%. To
enable TAX function, ‘TAX’ must be selected at the SPEC140C001 “Tax” (in W&M/Tax Spec) in
advance.
There are two types of taxes:
ATX: Tax is added to the Total Price.
VAT: Tax is included in the Total Price.
Note: If you want to print Price with Tax on Item Label, the selected label format must have print area for
Item Price after Tax.
To enable this function, please set Spec 140C001 to selection “1.TAX”
Touch [PROGRAMMING] key follow by
[PLU RELATED] key to enter to
Programming Mode.
Touch [TAX] key.
Note :
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed Tax File will be listed in
TAX PROGRAMMING Display Screen.
3. Display Screen also used to browse
existing Tax Files using the scroll bar and
to select file for modification
To Next Page
Loading...
