Digi SM-5300 - Page 242

Advertisement File
–––––––––––––––––––––––––––––––––––––––––––––––
16.2 Copy an Advertisement File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 241
16.2 Copy an Advertisement File
The programmed Advertisement data can be easily copied into a new advertisement. This function is
very useful to save time or avoid mistake for the similar Advertisement data programming.
OPERATION
DISPLAY
1.
In Place Programming Mode, enter an
advertisement number. (e.g. 5)
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
2.
Touch the desired advertisement data to
copy from.(e.g. 4)
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.