Digi SM-5300 - Page 264

Product Info File
–––––––––––––––––––––––––––––––––––––––––––––––––
19.3 Copy a Product Info File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 263
19.3 Copy a Product Info File
The Product Info data can be easily copied into a new Product Info. The function is very useful to
save time or avoid mistake for the similar Product Info data programming, especially in case of long
description of Product Info Name.
OPERATION
DISPLAY
1.
Menu Mode ~> Programming ~> PLU
Related ~> Product Info.
In Product Info Programming Mode, enter a
new Product Info number (e.g. 3).
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
2.
Touch the desired Product Info data to copy
from (e.g. 1).
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.