–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
21.1 Program Country File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 280
COUNTRY FILE
21.1 Program Country File
Country File is used to program Country Name for Traceability Information programming and printed
on Label. Since standard format does not have a print area set for Country Name, the Country Name
cannot be printed when using these formats. To print Country Name on the label, it is required to use
a Free Format with a Country Name print area programmed. Maximum 9999 Country Files can be
programmed and maximum 16 characters can be entered per Country File, each with 1 line.
Note: SPEC 146A008 “Traceability” (in Module Spec) must be enabled in advance.
Touch [PROGRAMMING] key follow by
[TRACEABILITY] key to enter to
Programming Mode.
Touch [COUNTRY] key.
Note:
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed Country File will be
listed in COUNTRY PROGRAMMING
Display Screen.
3. Display Screen also used to browse
existing Country Files using the scroll bar
and to select file for modification
To Next Page
Loading...
Need help?
General
