––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 301
CATEGORY FILE
Category File is used to program Name of the Category for Traceability Information programming
and printed on Label or Receipt. Since standard format does not have a print area set for Category,
the Category cannot be printed when using these formats. To print Category on the label, it is
required to use a Free Format with a Category print area programmed.
Maximum 9999 Categories can be programmed and maximum 16 characters can be entered per
File, each with 1 line.
Note: SPEC 146A008 “Traceability” (in Module Spec) must be enabled in advance.
Touch [PROGRAMMING] key follow by
[TRACEABILITY] key to enter to
Programming Mode.
Touch [CATEGORY] key to enter Category
Programming screen.
Note:
1. Touch [MENU] key back to
PROGRAMMING MODE
[TRACEABILITY]
screen.
2. Touch [GO TO] key to search and view
the existing Category Files
3. Touch the data file you want to modify.
4. Touch [COPY] key to create Category
File with data copied from existing
Category File.
To Next Page
Loading...
