Digi SM-5300 - Page 314

Fixed Length Barcode File
–––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 313
OPERATION
DISPLAY
11.
Touch [LENGTH] key and then enter length
(e. g. 14) then touch [OK] key
12.
Repeat from step 8 and on [FIELD]
selection select REFERENCE # follow with
touch [AUTO] to set auto OFFSET, and
enter length (e. g. 8) then touch [OK] key
Note:
1. Repeat touch key to add else Fields
Description to Length Barcode file.
2. Select a Field and touch key to edit.
3. Select a Field and touch key to
delete.
4. Touch [ARROW DOWN] or [ARROW
UP] for more selection.
5. Touch [CANCEL] key to cancel and exit
to Special Price Change display