––––––––––––––––––––––––––––––––––––––––––––––––––––
29.1 Program Traceability File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 317
Touch [TRACEABILITY] key.
Note:
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed Traceability File will be
listed in TRACEABILITY PROGRAMMING
Display Screen.
3. Display Screen also used to browse
existing Traceability Files using the scroll
bar and to select file for modification
Enter Traceability number. (e.g. 1)
Press [PLU] key.
To create a new Traceability, touch [YES]
key.
Note:
1. Touch [NO] key to abort.
2. Any 2 programming system for kind
depend on Spec141D053 “Traceability
Type” set to “Traceability” or “Assorted
Traceability”
3. For Spec141D053 set to “Assorted
Traceability” fill in traceability necessary
then touch [SAVE] key.
Spec141D053 “Assorted Traceability”
Spec141D053 set to “Traceability”
To Next Page
Loading...
Need help?
General
