Digi SM-5300 - Page 331

Cool Pretext File
––––––––––––––––––––––––––––––––––––––––––––––––––––––
31.2 Copy a Cool Pretext File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 330
31.2 Copy a COOL PRETEXT File
The programmed Cool Pretext data can be easily copied into a new Pretext, this function is very useful
to save time or avoid mistake for the similar Pretext data programming.
OPERATION
DISPLAY
1.
In PRETEXT Programming Mode, enter a
new Pretext number. (e.g. 12)
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
2.
Touch the desired Pretext data to copy from.
(e.g. PRETEXT #5)
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.