–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
32.1 Program Cool Text File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 333
COOL TEXT FILE
32.1 Program COOL TEXT File
Cool Text is used to program TEXT Name for COOL Information programming and printed on Label.
Since standard format does not have a print area set for Cool Text, the Cool Text cannot be printed
when using these formats. To print COOL TEXT on the label, it is required to use a Free Format with a
Cool Text print area programmed.
Maximum 999999 COOL TEXT can be programmed and maximum 100 characters can be entered per
COOL TEXT File, each with 1 line.
Note: 1. SPEC 146A008 “Traceability” (in Module Spec) set to “YES”.
2. SPEC 141D053 “Traceability Type” (in Module Spec) set to “Cool Feature”
Touch [PROGRAMMING] key follow by
[COOL] key to enter to Programming Mode.
Touch [COOL TEXT] key.
Note:
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed Cool Text File will be
listed in Cool Text Programming Display
Screen.
3. Display Screen also used to browse
existing Cool Text Files using the scroll
bar and to select file for modification
To Next Page
Loading...
Need help?
General
