Digi SM-5300 - Page 336

Cool Text File
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
32.2 Copy a Cool Text File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 335
32.2 Copy a Cool Text File
The programmed Cool Text data can be easily copied into a new Cool Text. This function is very useful
to save time or avoid mistake for the similar Cool Text data programming
OPERATION
DISPLAY
1.
In COOL TEXT Programming Mode, enter a
new Cool Text number. (e.g. 12)
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
2.
Touch the desired Cool Text data to copy
from.
(e.g. COOL TEXT 6)
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.