Default Production Step File
–––––––––––––––––––––––––––––––
35.1 Program Default Production Step
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 350
DEFAULT PRODUCTION STEP
35.1 Program Default Production Step
Default Production Step is used to program Name of the Default Production Step for COOL
Information programming and printed on Label or Receipt. Since standard format does not have a
print area set for Production Step, the Default Production Step cannot be printed when using these
formats. To print Default Production Step on the label, it is required to use a Free Format with a
print area programmed.
Note:
DEFAULT PRODUCTION STEP number should start with 9000
COOL CLASS in this file must follow what CLASS number when programmed COUNTRY File
e.g.: COUNTRY SINGAPORE in country file set cool class to 5, when select this country the cool class
Default Production Step should 5
Note: 1. SPEC 146A008 “Traceability” (in Module Spec) set to “YES”.
2. SPEC 141D053 “Traceability Type” (in Module Spec) set to “Cool Feature”
In PROGRAMMING MODE
touch
[COOL]
to entry COOL Programming Mode
Touch [DEFAULT PRODUCTION STEP]
key to enter PRODUCTION STEP
Programming screen.
Note:
1. Touch [MENU] key back to
PROGRAMMING MODE [COOL] screen.
2. Touch [GO TO] key to search and view
the existing Category Files
3. Touch the data file you want to modify.
4. Touch [COPY] key to create DEFAULT
PRODUCTION STEP with data copied
from existing Category File.
To Next Page
Loading...
Need help?
General
